Download Print this page

Troubleshooting - Sealey Autocharge1200HF Manual

Compact auto smart charger


5. trouBLeshootINg

no reaction when powered on.
Icon permanently displayed.
Flashing icon
mode cannot be selected.
WarNINg: Disconnect from power supply before performing any maintenance.
Cleaning and user maintenance should be carried out by competent persons.
After use and before performing maintenance, unplug and disconnect the battery charger.
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the battery connectors, cords, and the charger case.
ensure that all of the charger components are in place and in good working condition, for example, the plastic boots on the battery
Servicing does not require opening the unit, as there are no serviceable parts.
All other servicing should be performed by qualified service personnel.
If the mains cable is damaged, Do Not use until repaired.
Store the charger unplugged. The cord will still conduct electricity until it is unplugged from the mains.
Store inside, in a cool, dry place.
Do Not store the connectors clipped together, on or around metal, or clipped to cables. If the charger is moved around the workshop
or transported to another location, take care to avoid/prevent damage to the cables, connectors and charger. Failure to do so could
result in personal injury or property damage.
Weee reguLatIoNs
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
eNVIroNmeNt protectIoN
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7ar
01284 757500
© Jack Sealey limited
Check mains connection and power supply.
Return to Sealey stockist.
Incorrect polarity - swap battery connections.
Check connections to battery.
Check for broken cables.
Return to Sealey stockist.
mechanical failure of switch.
Improper operation of switch.
Note: mode can only be changed when battery is not
01284 703534
Original Language Version
Issue 1 22/08/18



Subscribe to Our Youtube Channel