Special Functions - RadioMaster T8 Pro Instruction Manual

4.4.9. Special Functions

The combination of logic switches, special functions, global variables, and pass
back items opens up a variety of exciting new features for the RadioMaster T8 Pro.
E.g.：
-Changes in battery voltage data returned by the receiver can trigger voice
alerts
-Altitude data returned from the barometer on the aircraft, real-time broadcast
of the aircraft's altitude
-By defining voice for the switch, real-time voice broadcast operation on the
radio controller
-Use logic switches and global variables to let the radio controller perform a
single or a series of automated actions
-Call lua scripts with switches or logic switches for more advanced custom
functions
-Use the knob to adjust the volume
-Use the switch to adjust the backlight brightness
In addition to a few of the commonly used methods listed above, the ever-
changing features allow you to realize your imagination
The three examples in the picture are represented as：
SF1：When the SF switch position is ↑, the CH3 channel will be covered by -100.
Usually this setting is used to lock the throttle.
SF2：When the logic switch L01 is automatically turned on, lowbat (low battery
voltage) warning sound will be broadcasted. The right-most 3s means that the
voice will be broadcasted every 3 seconds. Automatically turn on when
Each model can have 64 special functions. In addition, there are 64 global
settings that are common to all models. To use the global function, please enter the
Global Functions page in the radio-control system settings to set it.
42