Hyundai MG 611 Instruction Manual page 32

CAUTION: following descriptions are about accesories,
which does not include in box with this product.
It is possible to buy these accessories with mark
hyUMG600NASTAVCE.
SLICER
1) Insert the slice cutter P20 (or the fine bar cutter P23 and,
the coarse bar cutter P22 and Potato mud) into the cutter
housing B (P21).
2) Attach the cutter housing to the motor unit.
3) Now the appliance is ready for slicing.
Slicing
Cut the potato or other vegetable for processing it to pieces,
which size is suitable for cutter housing B. Choose the different
kind of cutter as requested. Put the pieces into cutter housing
and press slightly by pusher U.
(Note: Never press by finger.)
CONTROL
Turn the unit ON by pressing the main switch P5. Pressing the
switch again will turn the unit OFF. Press the reverse switch REV
P5 only after the shaft is in complete stop. After pressing the
button, the shaft will turn in the opposite way then during normal
operation. When releasing the button, the reverse movement of
the shaft will turn off.
TIPS
Lash down the power cord, then foist it into the place with arrow
diagramming. If the appliance is locked, please press Reversal
button (REV). The meat locked in cutter housing is untrodden, so
the appliance can renew its usual condition.
The parts of P14, P15, P16, a P17 can be stowed in the pusher.
ENG - 32