Extras; Short; Water; Pre-Wash - Miele WWD 120 Operating Instructions Manual

Hide thumbs Also See for WWD 120:
Table of Contents

Advertisement

Extras

You can use the Extras sensors to
augment the wash programmes.
Selecting Extras
Extras are selected and deselected
using the relevant sensors on the
control panel.
 Touch the sensor for the Extra you
want.
The relevant sensor will light up brightly.
Not all the Extras can be used with
every programme.
An Extra that is not permitted for the
wash programme is not lit dimly and
cannot be activated by touch.

Short

For light soiling with no visible staining.
The wash duration is reduced.
34

Water +

The water level in the main wash and
the rinse cycles is increased. A second
rinse cycle is carried out in the Separate
rinse/Starch programme.
You can select other functions for the
Water + sensor. These are described
under "Programmable functions".

Pre-wash

For laundry with large amounts of dirt,
e.g. dust and sand.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. For optimal
smoothing reduce the maximum load
by 50%. Small loads achieve a better
result.
The garments must be suitable for
drying in a tumble dryer   and
suitable for ironing  .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents