How The Control Panel Works - Miele WWD 120 Operating Instructions Manual

g Time display
After the programme has started, the
programme duration will appear in
the display in hours and minutes.
When Delay start is being used, the
programme duration will appear after
the Delay start time has elapsed.
h    sensor controls
The Delay start time selected will
appear in the time display.
After the programme has started, the
Delay start time will begin to count
down.
Once the Delay start time has
elapsed, the programme begins and
the estimated programme duration
appears in the time display.
 After touching the  sensor, a
later start time for the
programme (Delay start) can be
selected. Once selected, 
lights up brightly.

The duration of the Delay start
period is increased by touching
the  sensor.

The duration of the Delay start
period is reduced by touching
the  sensor.
Operating the washing machine
i Start/Add laundry sensor

The programme can be started
as soon as the sensor is
flashing on and off. Touching
the Start/Add laundry sensor
starts the selected programme.
The sensor lights up
constantly.

Once the programme has been
started, the Start/Add laundry
sensor allows you to add
laundry.
j Optical interface
For service technicians.
k Programme selector
This is used for selecting
programmes and for switching off
the appliance. The washing machine
is switched on by selecting a
programme, and switched off by
turning the programme selector to
the  position.

How the control panel works

The , , , ,  and  sensors
react to fingertip contact. Selection is
possible as long as the respective
sensor is illuminated.
If a sensor is brightly lit, this means:
currently selected
If a sensor is dimly lit, this means:
selection possible
13