Transportation
e.g. when moving home
Preparatory work:
Turn off the water tap.
1.
Reduce the water pressure in the
2.
supply hose. ~ Page 43
Drain any residual water.
3.
~ Page 42
Disconnect the appliance from the
4.
mains.
Remove the hoses.
5.
Empty the dispensers.
6.
Installing the transport locks:
Remove the covers and keep them
1.
in a safe place.
Use a screwdriver if
Note:
necessary.
Insert all four sleeves.
2.
Positioning and connecting
a) Clip the mains cable securely in
the holders.
b) Insert and tighten the screws.
c) Clip the hoses securely in the
holders.
Before switching on the appliance
again:
Notes
The support struts must be
■
removed.
~ "Removing the support struts"
on page 16
The transport braces must be
■
removed.
~ "Removing the transport locks"
on page 15
Pour approx. 1 litre of water into the
■
left-hand compartment, select the
Rinse or Spin programme and start.
This will prevent detergent from
flowing straight into the drain during
the next wash.
en
21