Table of Contents
Advertisement
Connection
Drainage into a washbasin
■
Secure the outlet hose so that it
cannot slip out.
Elbow available from after-sales
service:
Individual part number 00655300
Drainage into a siphon
■
The connection point must be
secured using a hose clamp with a
diameter of 24 - 40 mm (available
from specialist dealers).
The hose clamp is not
Note:
standard accessory, available from
specialist dealers.
Drainage into a plastic pipe with
■
rubber bushing or into a drainage
pit
The plastic pipe is not
Note:
standard accessory, available from
specialist dealers.
Positioning and connecting
Alignment
Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
Loosen the lock nuts using a
1.
wrench, by turning it in a clockwise
direction.
Check the alignment of the
2.
appliance with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
Tighten the lock nut against the
3.
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.
en
19
Advertisement
Table of Contents
