Setting The Gas Grill; Cleaning The Accessories - Bosch HGL128I.0R Instruction Manual

Before using for the first time
en

Setting the gas grill

Open the top cover. The top cover must remain
1.
open for as long as the cooker is in operation.
Turn on the main gas supply to the appliance. Insert
2.
the plug into the socket.
Insert the protecting plate into the groove below the
3.
control panel.
Insert the protecting plate with the longer edge at the
front and the curvature at the bottom.
Secure the protecting plate in the groove below the
control panel using the retainers.
Ensure that the protecting plate is engaged in the
retainers. If the protecting plate cannot be removed,
it is properly engaged. You can now safely use the
protecting plate. If it can be removed, insert it into
the groove at a slightly higher angle and make sure
that it engages in the retainers.
Close the oven door so that it is as close as possible
4.
to the protecting place.
Push in the function selector and turn it clockwise to
5.
the ignition position
Keep the function selector pressed in and turn it to
6.
the grill setting ( .
Keep the function selector pushed in for 10 seconds
so that the safety pilot starts up. The gas coming
from the gas grill is ignited.
Check whether the flame continues to light up. If the
7.
flame goes out, repeat the process from step 5.
Switch off the function selector after 30 minutes.
8.
Once the oven has cooled down, remove the
protecting plate.
Caution!
The gas grill only works when the protecting plate is
inserted.
Make sure that the protecting plate is correctly inserted.
16
.
8

Cleaning the accessories

Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.