Advertisement
Installation Diagram:
The TBC-6000 provides a Chroma Effect for two camera sources and a background video or one camera with
two background sources. The dual channel TBC allows you to cleanly switch between sources with no distortion
or noise. You can easily adjust your chroma key effect by using the key color and key level switches. You can
also use the Datavideo SE-200 Pro Integrated Editing Center for the A/B roll, A/B dissolve and Chroma Key
Effects.
Calibration of Chroma Key Effect
1.
Install the equipment as shown on the above diagram
2.
Power on all equipment and playback the source video
3.
Select the source on "A" output for Chroma key effect
4.
Select the source on "B" output for background video
5.
Select the Chroma Key Effect by pushing on the "CHROMA" key button, the Chroma Key LED will light
when the Chroma Key Effect is activated
6.
Adjust the Chroma-level again by pushing the "+" level key to maximum level
7.
Select the key color by pushing the "+" or "-" key to optimize the key color
8.
Adjust the Chroma level again by pushing the "+" or "-" level to optimize the key effect
Note:
To ensure the optimization of the Chroma key effect, please note the background key color shown on
the TV screen on source "A" output that should be the same as actual color. If not, please adjust the "White
Balance" of your source video camera to make background key color shown on the TV screen is same as the
actual color.
Back Panel Controls:
1.
Composite video input jacks for Source A to D.
2.
S-VHS video input jacks for Source A to D.
3.
S-VHS/Composite video input select switches for
Source A to D.
4.
Source A to D monitor output jacks (for previewing
Source A to D).
5. Composite video output jacks for source A to D.
6. S-VHS video output jacks for Source A to D.
7. DC 9V power input jack.
Advertisement
