Fitting The Castors - Dimplex OCR15FA Instruction Manual

Fitting The Castors

WARNING The radiator must only be operated with the wheels and castors fitted and
in an upright position. The castors must be fitted to the control panel and between the
last and second last fin on the opposite end, as shown in Fig.1.
1. To fit the castors, turn the radiator upside down on a carpet or other soft surface
to avoid damage. Warning: The radiator is heavy – ensure that it is supported to
prevent it from toppling. Ask a second person to help with this if necessary.
2. Locate the wire clamp (A) and remove the winged nut (C). Insert the non threaded
end of the wire clamp into one of the holes in the castor plate (B) as shown. Feed
the threaded end of the wire clamp between the last and second last column fins
ensuring the wire clamp wraps around the column body (sump). Some manipulation
of the plate and clamp will be required. The threaded end should then be passed
through the castor plate and secured using the wing nut.
3. To fit the castor to the control end, position the castor plate in position and secure
using the wing bolts (D). There are guides to ensure the correct positioning and
orientation of the caster plate.
4. Return the radiator to the correct orientation so it rests on the castors. The product
is now ready for use.
6
C
B
A
D
Fig. 1