Operation - Dimplex OCR15FA Instruction Manual

Operation

IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE PLACED ON THIS HEATER.
Before using the heater ensure that all warnings and instructions have been read
carefully. To activate the heater simply plug it in. Neon indicator lights located at the
control area will illuminate when the appliance is plugged into the mains. This indicates
the appliance is energised and ready to use.
Please note – The element has been coated with a protective film which will burn off
during the first few minutes of use, this may cause a small amount of fuming. This is
quite normal – the fumes are non-toxic and will quickly disappear.
We recommend that you open a window to ventilate the room when using the heater
for the first time.
CONTROLS
8
O /Heat selection
switch
Neon Indicator
Thermostat
Turbo
Turbo
Switch
Cable Wrap
Fig. 2
Fig. 3