Vaxcel T0478 Assembly And Installation Instructions

ASSEMBLY AND INSTALLATION
T0478
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Cross Bar (A)
Green Grounding Screw (E)
Wire Connector (F)
Outlet Box
Headless Screw (D)
Fixture Grounding Wire
Cross Bar (A)
Green Grounding Screw (C)
Mounting Screw (B)
Lock Nut (E)
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Installation Steps
Turn off the power at fuse or circuit box.
1. Thread two headless screws (D) through the cross bar (A), and then secure them with four lock nuts (F) (two on each
side of the cross bar (A).) Adjust the length of the headless screws (D) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture level.
T
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Mounting Screw (B)
Lock Nut (F)
Fixture
Wire
Wire Connector (C)
Ball Nut (G)
Photocell
Back Plate
Headless screw (D)
Rubber Pad (H)
Rubber Pad (H)
Ball Nut (G)
Fixture
Metal Frame
Bulb Type A
Max.60W
(not include)
Glass Panel
181204