Summit Solo Pro Manual page 8

STABILIZER BAR
1. Position the Female Section of the Stabilizer bar as
shown in figure 31. The Stabilizer bar will attach to the
welded U Bracket. Slide the bar into the bracket and
line up the hole.
2. Secure using one 1 3/4" bolt and lock
(see figure 32) Do not overtighten.
3. Position the Male Stabilizer bar as shown (figure 33).
Line up the bolt holes and secure using the
as shown in figure 34. The Stabilizer bar has several
pin
holes to accommodate different tree sizes.
31
33
STABILIZER
FEMALE SECTION
STABILIZER
MALE SECTION
(PN 82065.940)
PG 8
nut.
Wire Lock
STABILIZER
FEMALE SECTION
(PN 82065.950)
U BRACKET
1 3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
30
1 3/4" BOLT, LOCK NUT -
WRENCH TIGHTEN
32
1/4" WIRE LOCK PIN
34
www.summitstands.com