Summit Solo Pro Manual page 5

SEAT / BRACE
1. Position the Seat Base between the
Seat Supports as shown in figure 14.
2. Line up the holes and secure using
two 2 1/2" bolts with lock
overtighten as this connection is designed
to pivot. (see figure 15)
3. Position one of the Cross Tension Bars
between the Seat Support and Platform
as shown in figure 16.
4. Secure using two 1 3/4" bolts and lock
nuts. (see figure 17)
5. Repeat for the other Cross Tension Bar.
2 1/2" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
15
GUNREST
1. Slide the Gunrest Bar onto the Left and Right Gunrest Arms as
shown in figure 18.
2. Secure the Gunrest Bar using two
figure 19. The Wire Lock Pins allow adjustment of the Gunrest Bar by
sliding it in or out.
GUNREST
BAR
(PN 82065.810)
RIGHT
GUNREST ARM
(PN 82065.830)
nuts. Do not
16
1/4" Wire Lock Pins
LEFT
GUNREST
ARM
(PN 82065.820)
14
as shown in
DO NOT use the Gun Rest Bar as a hand hold while
climbing into our out of this stand.
18
19
SEAT
BASE
(PN 82065.600)
17
CROSS
TENSION
BAR
(PN 82065.010)
1 3/4" BOLTS, LOCK NUTS -
WRENCH TIGHTEN
CAUTION
!
1/4" WIRE LOCK PINS
PG 5