Check Weighing Operation - Detecto PS-11 Owner's Manual

CHECK WEIGHING OPERATION

Weight Less Than Under Limit Setting
If the displayed weight is less than the Under Limit setting, the Under annunciator triangle will
turn on, with NO backlight. Note that the scale will beep slowly when the weight is within 90% of
the Under Limit weight setting.
Weight Is Within Acceptable Limits
When the weight is within the acceptable target limits (the weight is between the Under Limit and
the Over Limit settings), the Accept annunciator triangle will turn on, the display backlight will
turn GREEN, and the scale will beep twice (after the weight is stable).
Weight Greater Than Over Limit Setting
This annunciator is turned on, the display backlight will turn RED, and the scale will beep
continuously, to signal that the weight is greater than the target Over Limit weight setting.
NOTE: The display will also show
three times when the weight is greater than the Over Limit weight setting.
Under
Accept
(with a RED display backlight) and the scale will beep
ERR
Over
8528-M310-O1 Rev C  PS-11
Under
Accept
Accept
7