Table of Contents
Advertisement
Installation
Push the fixing brackets and
against the housing unit wall.
.
3
Now secure the wine conditioning
unit to the other side of the housing
unit by screwing the supplied chip-
74
4.
board screws and through the
hinge plates at the top and bottom (3.
+ 4.).
Now tighten screws and .
Snap off any protruding ends from
securing brackets and . They are
no longer required and can be dis-
posed of.
Fit the cover to the top fixing
bracket.
Fit the supplied cover to the bot-
tom fixing bracket.
16
Advertisement
Table of Contents
