Table of Contents
Advertisement
General problems with the wine conditioning unit
Problem
The door seal is dam-
aged or needs to be re-
placed.
There is no audible
alarm although the door
has been open for a
long time.
The wine conditioning
unit cannot be switched
off.
The slats on the
wooden shelves are
warping.
Mildew has begun to
form on the wine bottle
labels.
A white deposit has
formed on the wine
bottle corks.
Cause and remedy
No tools are required to change the door seal.
Change the door seal. A replacement is available
from Miele or from specialist retailers.
This is not a fault. The alarm tone has been switched
off in settings mode (see "Selecting further settings –
Audible signals ").
The safety lock has been activated.
Completely deactivate the safety lock (see "Select-
ing further settings – Activating and deactivating
the safety lock ").
Volume change due to moisture absorption or drying
out is a typical characteristic of wood. An increase in
humidity will cause wooden components to warp,
which can lead to cracking. Knots and grain patina
are part of the natural character of wood.
Mildew can begin to form on the labels, depending on
the type of label adhesive used.
Clean the wine bottles and remove any adhesive
residue.
The corks have oxidised due to contact with the air.
Use a dry cloth to wipe off the deposit. The de-
posit will not affect the quality of the wine.
Problem solving guide
51
Advertisement
Table of Contents
