Connecting Your Camera To Computer; Connecting Your Camera To Printer - DXG -409 User Manual

Connecting Your Camera to Computer

1. Move the 5-way scroll button to the right, press the confirm
button to enter the SETUP menu and then move the 5-way
scroll button down and enter the USB menu. Set the USB
Mode to Mass Storage
2. Connect the USB cable to your camera and PC.
3. Once connected, the portable drive will be detected and shown
on the PC screen. Copy the files in the camera to your PC to
browse the pictures or play videos from your PC.
If a memory card is in the camera, all functions will be memory card
related. If you want to use the internal memory, just remove the
external memory card.

Connecting Your Camera to Printer

1. Move the 5-way scroll button to the right, press the confirm
button to enter the SETUP menu and then move the 5-way
scroll button down to enter the USB menu. Set the USB Mode
to direct print
2. Connect the USB cable to your camera and printer.
3. A dialogue box will appear on the LCD monitor.
4. Select Yes to start printing or No to return to the direct print
main screen.
In the print direct option, disconnect the USB cable if it is connected to other devices
(not printer). Then turn the camera on again.
In the print direct option, the default printing quantity is one page. However, in the
DPOF option, the default print quantity is zero pages.
In the print direct option, if the option of printing the recorded date stamp is not
supported by the printer, the option will turn red and cannot be changed.
If the following message appears on the LCD monitor, there might be a problem with
the printer. Three possible problems are listed below:
1.The printer is out of paper 2.The cartridge has run out 3.The paper size is invalid
If you encounter other printer problems, please contact the manufacturer of your
printer or an authorized service center for assistance.
Connecting Your Camera to Printer
.
.
- -
41