DXG -409 User Manual page 10

Turn off the camera before opening the battery / memory
card cover. First, make sure the memory card is oriented in
the right direction, then gently insert the memory card until it
reaches the bottom of the compartment. Close the cover.
If the memory
backwards or upside down, it will not
go in. Do not force it, or it might
damage the memory card.
To remove the memory card, first turn
off the camera. Then press the memory
card in gently and the card will pop out.
The memory card applicable to this camera is SD or MMC (4MB~512MB).
If the memory card is inserted the wrong way, it will not go in. Do not force it
or the memory card may become damaged.
If the camera cannot access the memory card, try wiping the metal interface
of the card with a soft cloth and reloading the card again.
Before inserting the memory card, make sure the card is unprotected.
( Otherwise, after the card is loaded, a
symbol will be displayed on the LCD
Before Taking Pictures
Contact pins
card is inserted
- -
9
Protected
Unprotected