Table of Contents
Advertisement
APPLICATIONS
Cutting various types of wood.
PRIOR TO OPERATION
1.
Power source
Ensure that the power source to be utilized conforms to the power requirements specifi ed
on the product nameplate.
2.
Power switch
Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle
while the power switch is in the ON position, the power tool will start operating immediately,
which could cause a serious accident.
3.
Extension cord
When the work area is removed from the power source, use an extension cord of suffi cient
thickness and rated capacity. The extension cord should be kept as short as practicable.
4.
Prepare a wooden workbench (Fig. 2)
Since the saw blade will extend beyond the lower
surface of the lumber, place the lumber on a
workbench when cutting. If a square block is utilized
as a workbench, select level ground to ensure it
is properly stabilized. An unstable workbench will
result in hazardous operation.
5.
When using the side handle (Fig. 3)
Securely attach the side handle to the base with the
two screws (M6 × 20) when using the side handle.
CAUTION
To avoid possible accident, always ensure that the
portion of lumber remaining after cutting is securely
anchored or held in position.
Lumber
Base
23
English
Saw blade
Workbench
Fig. 2
Side handle
Screw M6 × 20
Fig. 3
Base
Advertisement
Chapters
Table of Contents
