Panasonic Swtich-M48eG Series Installation Manual page 12

Ethernet switching hub
Table of Contents

Advertisement

2
Part Names and Functions
Port LED of 1–48 indicates each mode in the following way:
Port LED
Display mode
STATUS/ECO
GIGA
100M
Left
FULL
LOOP HISTORY
-
Right
12
Behavior
Green Light
Green Blink
Off
Green Light
Off
Green Light
Off
Green Light
Off
Green Light
Off
Orange Light
Off
Port LED (Left)
Port LED (Right)
Description
Link is established.
Transmitting and receiving data.
No device connected.
Link is established at 1000 Mbps.
Link is established at 100 Mbps or
10 Mbps, or no device is connected.
Link is established at 100 Mbps.
Link is established at 1000 Mbps or
10 Mbps, or no device is connected.
Link is established at full-duplex.
Link is established at half-duplex or
no device is connected.
Loop has been detected within the
last 3 days.
No loop detection history.
Shutting down by loop detection.
Not shutting down by loop
detection.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn28480k-thPn28480k-myPn28480k-idPn28480k-sg

Table of Contents