Download Print this page

GE Tetra GEPS24-180U Installation Manual page 2

Led systems power supply, 24 volt

Advertisement

NOTE: For CSA approval, a disconnect/toggle switch of appropriate rating needs to be placed within 29.5 ft. (9 m) of primary side of the
power supply. The minimum rating of the switch must be either 120 or 220 Volts AC. The switch must also support twice the amount of
input current.
NOTE: When installing power supply, connect to the appropriate sized building breaker or disconnect device for line and neutral
connections, in accordance with local, state or country regulations.
NOTE: Exceeding maximum load will cause the power supply to shut down. Once the excess load is removed, cycle the input power to
restart the power supply.
Power Supply Specifications
Performance Data
Input Voltage (VAC)
Input Frequency (Hz)
Input Current (A)
Output Voltage (VDC)
Output Current (ADC)
Output Power (W)
Environmental Operating Temperature Range
Environmental Humidity (non-condensing)
Environmental Storage Temperature Range
Dimensions
Supports
Tetra
Products
SKUs
Tetra
GEWHDSPS6, GEWWDSPS6-50K,
PowerStrip DS
GEWWDSPS6-41K, GEWWDSPS6
Tetra
GEWHBDP6, GEWWBDP6-50K,
miniStrip DS
GEWWBDP6-41K, GEWWBDP6
Tetra
GEWHBIP2, GEWWBIP2-50K,
EdgeStrip
GEWWBIP2-41K, GEWWBIP2
Tetra
GEWHXNLA2-WH, GEBLXNLA2-BL,
Contour LS
GEGLXNLA2-GL, GERDXNLA2-RD,
GEWHXNAA2-WH, GEBLXNAA2-BL,
GEGLXNAA2-GL, GERDXNAA2-RD,
Tetra Contour GEWHXNLE1, GEWWXNLE1,
GEBLXNLE1, GEGLXNLE1,
GERDXNLE1, GERCXNLE1,
GEYAXNLE1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This Class [A] RFLD complies with the Canadian standard ICES-005. Ce DEFR de la classe [ A ] est conforme à la NMB-005 du Canada.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Tetra is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
Min
90
-
0.7
23.25
-
-
-40°C
0%
-40°C
15.5 in. x 2.5 in. x 1.6 in. (392 mm x 62 mm x 40 mm)
Maximum Load
per Power Supply
14 modules/19.3 ft. (5.86 m) per bank;
28 modules/38.5 ft. (11.73 m) per PS
35 modules/35 ft. (10.67 m) per bank;
70 modules/70 ft. (21.34 m) per PS
33 modules/33 ft. (10.06 m) per bank;
66 modules/66 ft. (20.12 m) per PS
27 ft. (8.23 m) per bank;
54 ft. (16.46 m) per PS
27 ft. (8.23 m) per bank;
54 ft. (16.46 m) per PS
Conforms to the following standards:
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
Typical
100-277
50/60
-
24.0
-
-
+25°C
-
-
* Maximum case temperature is 80°C
Remote Mounting Distance
18 AWG/
16 AWG/
14 AWG/
0.82 mm
1.31 mm
2.08 mm
2
2
20 ft./6.1 m
25 ft./7.6 m
35 ft./10.6 m
20 ft./6.1 m
25 ft./7.6 m
35 ft./10.6 m
20 ft./6.1 m
25 ft./7.6 m
35 ft./10.6 m
30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m
30 ft./9.1 m 50 ft./15.2 m 80 ft./24.4 m
Max
305
-
2.5
24.75
3.8
180
+60°C*
95%
+85°C
12 AWG/
3.31 mm
2
2
40 ft./12.1 m
40 ft./12.1 m
40 ft./12.1 m
120 ft./36.6 m
120 ft./36.6 m
SIGN081-R012412

Advertisement

loading