Related Manuals for Epson ET-14000
Summarization of Contents
CHAPTER 1: Introduction
1.1 Features
Overview of printer's capabilities, including resolution and connectivity.
CHAPTER 2: PAPER TYPES AND SIZES Media Specification
2.1 Paper Sizes for this printer
Details paper types and their compatibility with the printer.
2.2 Paper Size and Orientation
Specifies dimensions and orientation options for various paper sizes.
2.3 Printable Area
Defines the printable and non-printable regions on paper sheets.
CHAPTER 3: Printing Option
3.1 Printing Quality
Describes the eleven different quality levels available for printing.
3.2 Recommended Settings
Provides recommended media and mode settings for color and monochrome printing.
CHAPTER 4: COMMAND SEQUENCE
4.1 Raster Graphics Modes
Explains the two modes for raster graphics commands: non-compressed and run-length encoded.
4.2 Command Transfer Procedure
Outlines command sequences for data transmission in graphics modes.
4.3 Limitations of Command Settings
Discusses constraints and important considerations for command usage.
4.4 Raster Graphics Data Format
Details the parameters for raster graphics commands and data format.
CHAPTER 5: INDIVIDUAL COMMAND SPECIFICATIONS
5.1.1 Exit Packet Mode
Command to exit EPSON packet mode, essential for communication.
5.1.2 Initialize Printer ESC @
Resets printer settings to their initial values and selects text mode.
5.1.7 Set Absolute Horizontal Print Position
Sets the absolute horizontal position for printing using ESC $ command.
5.1.9 Set Page Length
Defines the page length in defined units using ESC (C command.
5.1.11 Select Graphics Mode
Switches the printer to graphics mode, enabling specific commands.
5.1.18 Monochrome/Color Mode Selection
Selects between monochrome and color printing modes.
5.1.24 Print Raster Graphics
Command to print raster graphics with compression options.
CHAPTER 6: REMOTE MODE
6.1 Remote Mode Language Description
Overview of EPSON's bi-directional Remote Mode language.
6.1.1 Enter Remote Mode
Command to enter Remote Mode for printer control.
6.1.11 Select Paper Media
Specifies the paper media type for printing.
6.1.13 User Setting
Allows setting various printer parameters via user-defined configurations.
CHAPTER 7: STATUS REPLY CODE SPECIFICATION
7.1 Status Code
Defines binary codes indicating the printer's current operational status.
7.2 Error Code
Lists binary codes for various printer error conditions.
7.6 Ink Information
Provides details on ink cartridge status and information.
Need help?
Do you have a question about the ET-14000 and is the answer not in the manual?
Questions and answers