Electrolux GA60SLVS User Manual page 15

Hide thumbs Also See for GA60SLVS:
Table of Contents

Advertisement

Available languages

Available languages

German de‐
grees (°dH)
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Whether you use a standard detergent
or multi-tabs (with or without salt), set
the proper water hardness level to
keep the salt refill notification active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
8.2 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
French de‐
grees (°fH)
33 - 39
3.3 - 3.9
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
<7
mmol/l
Clarke de‐
grees
23 - 27
18 - 22
13 - 17
5 - 12
<0.7
< 5
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
When the salt container
needs refilling, the display
shows a message.
ENGLISH
15
Water softener
level
1)
5
4
3
2
2)
1

Advertisement

Chapters

Table of Contents
loading

Table of Contents