Advertisement
1
B
x2
A
?
Wall Mount Option
!
Secure luminaire wall
bracket with suitable
fasteners (supplied by
others) for a 12mm
diameter clearance hole
170
4 x O 12 mm holes
170
Damage can be caused by
!
opening the door incorrectly
C
B
C
D
8Nm
2
A
3
A
HARD WIRED CONFIGURATIONS
L
N
3 x 2.5mm cable only (overall diameter 11.4mm)
!
ANY OTHER CABLE SIZE MAY COMPROMISE THE IP RATING OF THE LUMINAIRE
B
C
D
8Nm
B
C
L
N
+D1-D2
Advertisement
Table of Contents
Related Manuals for Acuity Brands Holophane DSX2
Summary of Contents for Acuity Brands Holophane DSX2
- Page 1 Damage can be caused by opening the door incorrectly Wall Mount Option Secure luminaire wall HARD WIRED CONFIGURATIONS bracket with suitable fasteners (supplied by +D1-D2 others) for a 12mm diameter clearance hole 4 x O 12 mm holes 3 x 2.5mm cable only (overall diameter 11.4mm) ANY OTHER CABLE SIZE MAY COMPROMISE THE IP RATING OF THE LUMINAIRE...
- Page 2 INSTALLATION INSTRUCTIONS INSTRUKCJA MONTAZU INSTALLATIONSANWEISUNGEN MONTÁZNÍ INSTRUKCE GEBRUIKSAANWIJZING TEN ISTRUZIONE DI MONTAGGIO BEHOEVE VAN DE INSTALLATIE INSTRUCCIONES DE INSTALACIÓN MONTERINGSANVISNING INSTRUCTIONS D'INSTALLATION. MONTAGEINSTRUKTION DSX2 (GB) SAFETY NOTICE READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING THIS LUMINAIRE Ensure adequate voltage and frequency is supplied to the equipment. Disconnect luminaire from the main power before performing any maintenance or lamp replacement. Maintenance or replacement of any serviceable component must be identical following recommendations from HOLOPHANE.
Need help?
Do you have a question about the Holophane DSX2 and is the answer not in the manual?
Questions and answers