Directed Electronics Intelliguard 850 Owner's Manual page 44

PlainView 2 Valet Switch : A small two-button switch mounted some-
where inside the vehicle. It is used to override the alarm when a trans-
mitter is lost or damaged, or to enter or exit Valet mode.
Proximity Sensor : This is a sensor mounted in the vehicle that is
designed to protect the interior and its contents.
Siren : Noise generating device usually installed in the engine compart-
ment of the vehicle. It is responsible for generating the "chirps" you
hear, as well as the six tones you hear while the alarm is triggered.
Transmitter : Hand-held transmitter which operates the various func-
tions of your system.
This is what happens when the alarm goes
Trigger or Triggered Sequence:
off or trips. The triggered response of your system consists of the siren
sounding and parking light flashing for the programmed duration.
Warning Zone Response: Lighter impacts or movement close to the vehi-
cle will generate the Warning Zone response. It consists of a warning
siren blast or beep.
Zone : A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone. Two
or more inputs often share the same zone.
41
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .