Connecting The Pulse Generator/Speed Sensor (Radial Ventilation Option); Figure 3-9 Electrical Connection Of The Speed Sensor - Siemens 1PL622 Operating Instructions Manual

Transport, assembly, and connection
3.3 Electrical connection
Electrical connection of the speed sensor
Figure 3-9
①
②
③
[ID: 364.01]
3.3.6

Connecting the pulse generator/speed sensor (radial ventilation option)

Connection
Connect the pulse generator to the terminal box by means of a plug-in connection ①. It is
located on top of the box housing.
38
Electrical connection of the speed sensor
Insert the connector into the socket.
Press the cable into the holder provided for it.
Screw on the sensor cover. Take care that you do not catch the cable as you screw it
in.
Siemens AG Operating Instructions 2.02 1PL622
A5E00264365A