Activating Or Deactivating An Identify Led By Using The Management Console; Deactivating A System Attention Led Or Logical Partition Led By Using The Advanced System Management Interface - IBM Power Systems 9008-22L Manual

5. Click Turn Attention LED Off. A confirmation window is displayed that provides the following
information:
v A verification that the system attention LED was deactivated.
v An indication that there still might be open problems within the system.
v An indication that you cannot activate the system attention LED.
6. Select one of the logical partitions in the lower table, and click Turn Attention LED Off. A
confirmation window is displayed that provides the following information:
v A verification that the logical partition LED was deactivated.
v An indication that there still might be open problems within the logical partition.
v An indication that you cannot activate the logical partition LED.
Activating or deactivating an identify LED by using the management
console
You can activate or deactivate an identify LED for components that are attached to the system from the
Hardware Management Console (HMC).
About this task
The system provides several LEDs that help identify various components in the system, such as
enclosures or field-replaceable units (FRUs). Hence they are called identify LEDs.
You can activate or deactivate the following types of identify LEDs:
v Identify LED for an enclosure. If you want to add an adapter to a specific drawer (enclosure), you
need to know the machine type, model, and serial number (MTMS) of the drawer. To determine
whether you have the correct MTMS for the drawer that needs the new adapter, you can activate the
LED for a drawer and verify that the MTMS corresponds to the drawer that requires the new adapter.
v Identify LED for a FRU associated with a specified enclosure. If you want to hook up a cable to a
specific I/O adapter, you can activate the LED for the adapter, which is a field replaceable unit (FRU),
and then physically check to see where you should connect the cable. This is especially useful when
you have several adapters with open ports.
To activate or deactivate an identify LED for an enclosure or FRU, complete the following steps:
1. In the navigation area, click the Resources icon
2. To view the actions for that server, select the server.
3. In the navigation area, click System Actions > Attention LED > Identify Attention LED. The Identify
Attention LED, Select Enclosure window is displayed.
4. To activate or deactivate an identify LED for an enclosure, select an enclosure from the table, and click
either Activate LED or Deactivate LED. The associated LED is either turned on or off.
5. To activate or deactivate an identify LED for a FRU, select an enclosure from the table, and then click
Selected > List FRUs.
6. Select one or more FRUs from the table, and click either Activate LED or Deactivate LED. The
associated LED is either turned on or off.
Deactivating a system attention LED or logical partition LED by using
the Advanced System Management Interface
You can deactivate a system attention LED or a logical partition LED by using the Advanced System
Management Interface (ASMI).
62
Front USB cable
, and then click All Systems.