Avital Diablo 2 Owner's Manual page 6

To Silently Arm or Disarm the System — Press remote button #3
n
for 1-2 seconds.
Si lent Arm In di ca tions. The parking lights will flash twice, the
n
doors will lock, the starter will be disabled and the LED will flash
slowly.
Si lent Dis arm In di ca tions. The parking lights will flash once, the
n
doors will unlock, the starter will be enabled and the LED will turn off.
Interior Light Illumination Capability — When the alarm system
n
is remotely disarmed, the vehicle's interior light(s) will turn on for 30
seconds or until the ignition key is turned on (requires an optional relay).
To Activate an Accessory — Press remote button #2 for 1-2
n
seconds to activate an optional accessory such as trunk release, remote
engine starter or a remote control garage door opener.
Valet Switch — The valet switch is a small hidden toggle switch that
n
allows you to program many features of the alarm system and prevent
passive arming. In the event of a lost or stolen remote control, you can
also use this switch to bypass (shut off) the alarm system.
BE SURE TO ASK YOUR DEALER TO SHOW YOU WHERE THE VALET
SWITCH IS LOCATED.
If passive arming is turned on, you should put your system in Valet Mode
when your car is being serviced by mechanics, car wash personnel or
driven by valet attendants. While in Valet Mode, all alarm functions are
bypassed to prevent undesired or accidental arming.
To Turn on Valet Mode
n
1. Turn your ignition key to the "ON" position or start the vehicle.
2. Flick the valet switch to the "ON" position.
3. The LED will turn on solid red to indicate the alarm is in Valet
Mode.
Diablo
6
2
/AMX 68/AT-58 Owner's Manual 12/29/97