Table of Contents
Advertisement
Deciding On an Installation Environment
Deciding On an Installation Site
Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location can cause
accidents, fire, faulty operation, or breakdown.
WARNING
CAUTION
WARNING
WARNING
WARNING
CAUTION
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy
Point
When you install the machine, check that all four rubber feet of the machine contact the ground.
If any of the rubber feet do not contact the ground, you can adjust their height by rotating them.
2.Installation
20
Install the machine in a location that is level, stable, and able to bear the weight
of the machine.
The total weight of the machine may reach 118 kg (260.1 lb.) or more. Installation in
an unsuitable location may cause a major accident, including tip over, fall, or collapse.
Unloading and emplacement are operations that must be performed by four
persons or more.
Tasks that require undue effort when performed by a small number of persons may
result in physical injury. Also, if dropped, such items may cause injury.
Never install this machine outside or in any location where exposure to water or
high humidity may occur.
Current leakage may cause electrical shock or fire.
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of
combustion due to ink fumes.
Advertisement
Table of Contents
