Step 3: Connecting The Cables - Roland SF-200 Setup Manual

Step 3: Connecting the Cables

WARNING
WARNING
WARNING
Power cord
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Connect to an electrical outlet that complies with this machine's ratings (for
voltage, frequency, and current).
Incorrect voltage or insufficient current may cause fire or electrical shock.
Connect the machine to ground.
This can prevent fire or electrical shock due to current leakage in the event
of malfunction.
Electrical outlet
Ethernet cable
(Category 5 or higher)
Ethernet
(100Base-TX recommended)
Never insert a telephone cable.
AC adapter port
Do not connect any cable other than
the AC adapter cable supplied with
dedicated optional products.
Setting Up the Machine
2.Installation
29