Zipper Insertion; Inserting A Centered Zipper - Necchi NC-204D Instruction Manual

Zipper insertion

This foot can be set to sew on each side of the zipper, the edge of the foot guides the
zipper to ensure straight placement.
1
1.5~3.0
3
5
4
1
2
1
2
3.5
4
1
61
Using the zipper foot.
n Attention
Zipper foot should be used for sewing
straight stitches only. It is possible that the
needle could hit the presser foot and break
when sewing other stitches.
When sewing, be sure that the needle does
not touch the zipper, otherwise the needle
may bend or break.
v Inserting a centered zipper
Place the right sides of the fabric together.
Sew a bottom seam 2cm from the right edge
of the zipper bottom stop position. Sew few
reverse stitches for fixed. Increase the stitch
length to maximum, set the tension below 2
and baste the remaining length of the fabric.
Press open the seam allowance. Place the
zipper face down on the seam allowance with
the teeth against the seam line. Baste the
zipper tape in place.
①
Wrong side
②
2cm
③
5mm
④
Basting
⑤
Reverse stitches
Attach the zipper foot.
①
Attach the right pin for sewing the left side
of the zipper.
②
Attach the left pin for sewing the right side
of the zipper.