Cording; Single Cording; Striple Cording - Necchi NC-204D Instruction Manual

Cording

Used for embellishing 1 to 3 cords or decorative threads. Sew over one strand of cording
to create a pretty swirled design on a jacket or vest or sew over three strands of cording
for border trims. Pearl cotton, knitting yarn, embroidery floss, lace thread, fine wool or
lily yarn can be used for cording.
5
1
6
005
1
Using the cording foot.
v Single cording
Mark the design on the fabric. Insert the cord
in the center groove of the cording foot from
the right side opening.
①
Right side opening
Place the cord under the groove of the
cording foot and pull the cord about 5cm
behind the foot.
The grooves under the foot will hold the
length of the cord in place while the stitches
are being form over the cord.
Select the stitch and adjust the stitch width
so that the stitches are just covering the cord.
Lower the presser foot lifter and sew slowly,
guiding the cord over the design.
Using the cording foot.
v Striple cording
Mark the design on the fabric. Insert the cord
in the center groove of the cording foot from
the right side opening.
① Right side opening
Place three cords under the grooves of the
cording foot and pull the cord about 5cm
behind the foot.
The grooves under the foot will hold the
length of the cord in place while the stitches
are being form over the cord.
Select the stitch and adjust the stitch width so
that the stitches are just covering the cord.
Lower the presser foot lifter and sew slowly,
guiding the cord over the design.
72