Valet Mode; Panic Mode - Directed Electronics Automate 552 Owner's Manual

Remote start keyless entry system

Table of Contents

Valet

Mode

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet

This is very useful when washing the vehicle or having it serviced.

In Valet

Mode, the starter kill cannot be activated, even with the

transmitter, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

To enter or exit Valet

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

switch within 10 seconds.

The status LED will light steadily if you are entering Valet

and will turn off if you are exiting Valet

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press

for 1 second to enter Panic Mode. In Panic Mode, the

horn will honk and the parking lights will flash for 30 seconds. To

stop Panic Mode at any time, press

NOTE: In order for Panic Mode to be effective, the vehicle's horn (or

optional siren) as well as the vehicle's parking lights must be

connected.

Mode:

Mode.

on the transmitter.

Mode.

DRW-35

Mode

1999 Directed Electronics, Inc.

Table of Contents