Table of Contents
Advertisement
3 Insert the new memory module in the slot:
a Push the retaining clips on the slot out to the sides.
b Align the notch on the gold edge of the module with the notch in the memory slot.
c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as
the module is correctly inserted.
Note:
Hold the memory module by its edges, and do not touch the gold connectors.
4 Put back the rear top cover you lifted in step 2.
a Align the hexagons at the side of rear top cover with the slots on the chassis' edge, and push the rear top
cover back in position.
b Put back and fasten the screw you removed in step 2.
12 Chapter 2: Hardware Setup
Advertisement
Table of Contents
