Table of Contents
Advertisement
3 Insert the loaded drive tray into the empty drive bay.
Note:
Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.
4 Push the handle inward to secure the drive tray.
5 Push the switch on the drive tray handle to the bottom to lock the drive tray.
6 Repeat the steps above to assemble the other drives you have prepared.
7 Drives are numbered as shown below.
Note:
We suggest installing drives of the same size to optimize drive capacity usage when creating RAID volumes.
10 Chapter 2: Hardware Setup
Advertisement
Table of Contents
