Mounting Your Soundbar On A Wall (Optional) - Insignia NS-HMSB20 User Manual

Mounting your soundbar on a wall (optional)

Notes:
• Make all connections to your soundbar before mounting the soundbar on a
wall.
• If you mount your soundbar on a wall, you will not be able to use a USB
thumbdrive as a sound source.
• If you mount your soundbar on a wall, you must use right-angle cable
connectors for the RCA cable (AUX IN) connection.
You will need (not included with your soundbar):
Level
Tape measure
Select a location close to your TV and directly in front of the
1
viewing/listening position. For best sound quality, choose a location
where sound waves are not blocked by furniture or other obstacles.
If you are mounting your soundbar to drywall, use the stud finder to
2
find the studs and mark the locations.
Drill two 15/64" holes into the wall 11.4" (29 cm) apart and make sure
3
they are level.
Stud finder
(optional for wood
stud installation)
Wall anchors (2)
Tape
11.4" (29 cm)
www.insigniaproducts.com
2.0 Channel Mini Soundbar
Drill and
Hammer
drill bit
Screws (2) - 9/16" (3.6 mm) self-tapping, at
least 1 1/8" (28.5 mm) long
Screwdriver
17