Using The Remote Control; Installing The Remote Control Batteries - Insignia NS-HMSB20 User Manual

# BUTTON
7 THEATER
8 STANDARD
9 (Mute)
10 (next)
11 NEWS

Using the remote control

Point the remote control directly at the IR sensor on the front of the
soundbar. You must be within approximately 26 ft. (8 m) of the soundbar
and within 30° on either side.

Installing the remote control batteries

Remove the battery compartment cover from the back of the remote
1
control.
Insert two AAA batteries into the battery compartment, making sure
2
that the polarity on the batteries matches the + and - symbols inside
the battery compartment.
10
DESCRIPTION
Press to enter the THEATER sound mode to optimize music played
in a theater setting. The status indicator on the soundbar blinks
white three times.
Press to enter the STANDARD sound mode to optimize general
music. The status indicator on the soundbar blinks white three
times.
Press to mute the sound from the soundbar. Press again to restore
the sound.
In Bluetooth mode, press to go to the next track.
Press to enter the NEWS sound mode to optimize the spoken
voice. The status indicator on the soundbar blinks white three
times.
www.insigniaproducts.com
IR Sensor
NS-HMSB20