Echo CS-2511T Operator's Manual page 52

MAINTENANCE
• To keep correct position and correct
angle, use a file holder.
• Hold the file horizontally.
• Place the depth gauge tool firmly
on guide bar so that depth gauge
protrudes. Then file top of depth
gauge with the flat file until flat with
top of the depth gauge tool.
• One fifth of the file diameter
remains above cutter edge.
• Be sure to round off the front edge
of the depth gauge.
• Properly filed cutters are shown in
illustration.
• When setting of the chain is
finished, soak it in oil and
wash away filings completely
before using.
52
1/5
Depth gauge tool
30°
Top plate
filing angle
© 11/19 ECHO Incorporated
CS-2511T
90°
55°
Side plate angle
X7503332503