Starting Cold Engine - Echo CS-2511T Operator's Manual

OPERATION
Operation of this equipment may create sparks that can start
fires around dry vegetation. This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.

Starting Cold Engine

Make sure the bar and chain are free from any obstruction when
starting the chain saw.
1. Move chain brake lever fully
FORWARD to LOCK chain brake
before starting.
2. Fill the fuel tank with fuel mixture.
Do not over fill.
3. Fill the chain oil tank with
lubricant. Do not over fill.
4. Move ignition switch FORWARD
to "RUN" position.
5. Push purge pump 3 to 4 times or
until fuel is visible in purge pump.
6. Turn choke control knob
counterclockwise to (CLOSED
[ ] choke position).
30
Chain Brake LOCKED
Shown with optional
Kick Guard
START / RUN
Choke Control Knob
© 11/19 ECHO Incorporated
CS-2511T
TM
Ignition Switch
Purge Pump
X7503332503