Table of Contents
Advertisement
Operating Instructions
05.
Uniprep 1 + 2 Rotary Scraping Tools
Specifications
Materials:
Finish:
Dimensions:
Depth of Cut:
Max Scrape Length:
Min - Max Pipe Size:
Weight:
Product Codes:
This unit is design and manufactured to meet the requirements of
National Grid Gas Industry Standards GIS/PL2-5 Part 5 Electrofusion
ancillary tooling.
Caldervale Technology Ltd has a policy of continuous improvement
in product quality and design. Caldervale Technology Ltd therefore
reserves the right to change the specification of its models at any time,
without prior notice.
It is the responsibility of the operator to ensure that the PE pipe
is suitable for pipe preparation if in doubt contact the PE pipe
manufacturer for confirmation.
Mild Steel EN3A, Stainless Steel,
Aluminum, Brass and Tungsten Carbide
Natural / Zinc passivate to mild steel
Uniprep 1: L390 x W160 x H260mm
Uniprep 2: L420 x W160 x H270mm
feed per rotation 4.5mm
0.3mm
Uniprep 1: 150mm
Uniprep 2: 175mm
Uniprep 1: 90 - 400mm All SDR Ratings
Uniprep 2: 125 - 500mm All SDR Ratings
Uniprep 1: 3.6kg
Uniprep 2: 3.8kg
Uniprep 1: 01-02-001, 01-02-002
Uniprep 2: 01-03-001, 01-03-002
05. Specifications
07
Advertisement
Table of Contents
