Table of Contents
Advertisement
Operating Instructions
02.
Uniprep 1 + 2 Rotary Scraping Tools
Safety Instructions
1.
Read and understand the whole instruction booklet before using the
tool.
2. It is imperative that all possible precautions are made to avoid
unexpected pipe movement when the tool is being used.
3. Never use the tool on pipes that are not within the specified
dimensions.
4. The tool tip holder spring tension is factory set and MUST NOT be
tampered with, without adequate training or instruction.
5. Operatives should wear eye protection, gloves, safety headwear and
footwear when using the equipment.
6. A single scrape / pass cannot be guaranteed to provide 100%
preparation, where this is required users are advised to consider
making 2 scrapes around the pipe.
02. Safety Instructions
03
Advertisement
Table of Contents
