SPECIFICATIONS
4
US
CA
26-1/2 "
8-1/2 "
RANGE MOUNT STANDARD BACKGUARD
INSTALLATION
1. Unpack the backguard and screw the front section onto the back section, as shown (Fig. 01)
2. Align the backguard with the range, so that it rests on the island trim. Fasten the bottom of the backguard to the
rear of the range using all the screws provided, as shown (Fig. 02). The two center screws come already attached
to the range for your convenience.
Front Section
8-3/4 "
12 "
A
1-5/16 "
A
1-5/16 "
Back Section
# 8
Self-tapping
sheet metal
screws
Fig.01
WALL MOUNT FULL BACKGUARDS
MODEL
A
RACK (13-5/8") QTY. RACK (16-5/8") QTY.
BGRU-3030 29-7/8" 2
BGRU-3036 35-7/8" -
BGRU-3048 47-7/8" 2
RANGE MOUNT STANDARD BACKGUARDS
MODEL
A
BGRU-1230
29-7/8"
BGRU-1236
35-7/8"
BGRU-1248
47-7/8"
-
2
1
Screw is loosened
Fig.02