Specifications; Wall Mount Standard Backguard Installation - DCS BGCU-3036 Installation Instructions Manual

SPECIFICATIONS

8
US
CA
30 "
12 "
WALL MOUNT STANDARD BACKGUARD
INSTALLATION
1. Locate and level cooktop per installation instructions.
2. After unpacking all backguard system parts, locate the Back Section 1/4" above and centered over the Trim
attached to the cooktop.* Secure Back Section to wall with the appropriate fasteners (not supplied)(fig. 07).
*After 1/4" is located, slots in back section may be used to adjust spacing between cooktop trim and
backguard for a flush fit.
3. Secure Front Section of backguard to Back Section with #8 self-tapping sheet metal screws supplied
(fig. 08).
8-3/4 "
12 "
A
1-5/16 "
15/16"
15/16"
1-5/16 "
A
Slots to choose desired spac-
ing between Cooktop Trim and
Backguard.
Back Section
1/4"
Trim
Fig.07
WALL MOUNT FULL BACKGUARDS
MODEL A RACK (13-5/8") QTY. RACK (16-5/8") QTY.
BGCU-3036 35-7/8" -
BGCU-3048 47-7/8" 2
WALL MOUNT STANDARD BACKGUARDS
MODEL A
BGCU-1236 35-7/8"
BGCU-1248 47-7/8"
Front Section
Back Section
Fig.08
2
1
# 8
Self-tapping
sheet metal
screws