Table of Contents
Advertisement
System Events: Monitoring the system's status.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when an incorrect password is use in a login attempt. The
IP address of the source will be recorded.
PoE Events: Monitoring the PoE ports status.
PoE Power fail: a trap when the port's power source is fail.
Power on/Power off: a trap when the PoE port's power is on and down.
Power over current: a trap when the PoE port's power is over current.
Power short circuit: a trap when the PoE port's power circuit was short.
Power threshold above/below: a trap when the Midspan's system usage over
80% or below from 80%, the system power budget.
Delete Trap: To delete a previously defined SNMP Trap, Press the "Delete
Trap" button. In the SNMP Trap Delete configuration window select the check
box of the corresponding SNMP Trap that you wish to delete, then click Apply.
24
Advertisement
Table of Contents
