Table of Contents
Advertisement
In the "File TAB", the choices are Monitor Save, Monitor Save As, Monitor Load
and Exit.
Monitor Save: To record the setting of the Monitor List to the default, when you
open the Web Management Utility next time, it will auto load the default
recorded setting.
Monitor Save As: To record the setting of the Monitor List in appointed
filename and file path.
Monitor Load: To manually load the setting file of the Monitor List.
Exit: To exit the Web Management Utility.
In the "View TAB", the choices are view log and clear log functions, these
functions help monitor and maintain SNMP Trap events.
View Log: To show the event of the Web Management Utility and the device.
Clear Log: to clear the log.
In the "Option TAB", the choices are Refresh Time function, this function helps
you to refresh the time of monitoring the device. Select 15 seconds, 30 seconds,
1 min, 2 min and 5 min to configure the time of monitoring.
In the "Help TAB", there is an About function, it will show the version of the Web
Management Utility.
Configuring the DWL-P1012
The DWL-P1012 has a Web GUI interface for smart function configurations. The
DWL-P1012 may be configured through a Web Browser or using the Web
Smart Utility. A network administrator can manage, control and monitor the
DWL-P1012 from the local LAN. This section indicates how to configure the
Midspan to enable its smart functions including: SNMP Setting, PoE Setting,
Schedule and Grouping, SNTP Settings, System Setting, Device status,
and RTC settings.
Login
Prior to configuration of the DWL-P1012, take note that the DWL-P1012 must
be configured through an Ethernet connection. Make sure the manager PC is
17
Advertisement
Table of Contents
