Table of Contents
Advertisement
C
ONFIGURATION
Through the Web Browser you can configure the DWL-P1012's PoE power
management configuration.
With the attached Web Management Utility, you can easily discover all DWL-
P1012 units on the network, assign them IP Addresses, change the
administrative passwords and upgrade firmware.
Installing the Web Management Utility
Follow these instructions to install and use the Web Management utility.
1.
Insert the DWL-P1012 Master CD in the CD-Rom Drive.
2.
Allow the CD to Autorun. From the Autorun menu select the option to
install the utility. Skip to step 4. If the Menu does not automatically appear,
go to the Start menu on the Windows desktop, then choose Run.
3.
In the Run dialog box, type D:\Web Management Utility\setup.exe (D:\
depends where your CD-Rom drive is located) and click OK.
4.
Follow the on-screen instructions to install the utility.
5.
Upon completion, go to Program Files -> web_management_utility and
execute the Web Management utility.
The Web Management Utility is
divided into four sections:
Discovery List, Monitor List,
Device Setting and Toolbar
function. For detailed instructions,
refer to the corresponding section
in the following pages.
12
Advertisement
Table of Contents
