Reset Button - D-Link AirPlus DWL-G710 User Manual

Troubleshooting (continued)
8. Resetting the DWL-G710 to factory default settings
After you have tried other methods for troubleshooting your network, you may choose to
Reset the DWL-G710 to the factory default settings.
To hard-reset the D-Link DWL-G710 to the factory default settings, please do the
following:

Reset button

Locate the Reset button on the back of the
DWL-G710.
Use a paper clip to press the Reset button.
Hold for about 5 seconds and then release.
After the DWL-G710 reboots (this may take a few
minutes) it will be reset to the factory Default settings.
40