D-Link AirPlus DWL-G710 User Manual page 15

Using the Configuration Menu (continued)
AP Name -
You may choose to rename
your DWL-G710, especially if
you have more than one
DWL-G710 on your network.
SSID (Service Set
Identifier) -
Enter the SSID of the network
you wish to repeat.
Site Survey -
Click Site
Survey to receive a list of
networks that are available for
connection. Please see the
screen on the following page for more information on this feature.
Channel -
Select the channel from the pulldown menu.
All devices on the network must share the same channel in order to communicate.
WEP -
For a level of security, select Enable Encryption to use WEP (Wired Equivalent
Privacy) on the network. All devices on the network, and the access point, must share
the same WEP selection - either Enable or Disable.
WEP Encryption -
WEP Mode -
Select ASCII or Hexadecimal mode and then input the appropriate
digits or letters into each Key field. You can create up to 4 keys. Select the key you
wish to use.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
TX Rates - Select the transmission rate for the network.
Apply -
Click Apply to save the changes.
Wireless
Select either 64- or 128-bit length.
15