Brightness; Display Switch-Off; Program Info - Miele WWH 660 Operating Instructions Manual

Settings

Brightness

You can set the brightness of the
display, the sensor buttons, and the
dimmed sensor buttons.
Options
– Display
Controls the brightness of the
display.
–        (dark)
–        (light) (factory setting)
–
Button lighting on
Controls the brightness of the
activated sensor buttons.
–        (dark)
–        (factory setting)
–        (light)
– Button lighting off
Controls the brightness of the sensor
buttons that can be activated.
–        (dark) (default setting)
–        (light)
Useful tip: Ensure that there is a
discernible difference in brightness
between the activated and dimmed
sensor buttons. This makes it easier to
operate the appliance.
86

Display switch-off

The display and the sensor button
lighting is switched off to save energy.
The Start/Stop sensor button flashes
slowly.
Options
– On
Lighting switches off after 10
minutes.
–
On (not crnt prog)
Lighting remains switched on
throughout the program. The lighting
switches off 10 minutes after the
program has ended.
– Off
The lighting remains switched on.

Program info

You can select the information that will
be displayed temporarily once a
program has been selected in the
display.
Options
– Program name (factory setting)
The program name is shown in the
display for several seconds.
–
Prog. nm. & max ld.
The program name and the maximum
load are shown in the display for
several seconds.
–
Off
Directly after the program has been
selected, the standard display is
shown with temperature, spin speed,
and program duration.
(factory setting)